DANIEL 2500 User's Reference Manual page 122

______________________________________________________ ______________________________________________________ MODEL
If access is desired to a row in the table other than row number 1, the user
must type in the new row number and press the ENTER key. (This example
assumes the user entered a new row number of 5.) When the new row
number is visible in the display screen, the user presses the EXIT or DOWN
arrow key, which causes the following illustrated display screen to appear,
displaying data that indicates the current value, or column position, of
STRT_COL is 1.
If access is desired to a column in the table other than column 1, the user
must type in the new column number and press the ENTER key. (This
example assumes the user entered a new column number of 1.) When the
new column number is visible in the display screen, the user presses the
EXIT or DOWN arrow key, which causes the following illustrated display
screen to appear.
For the purpose of this example, the above display screen data indicates that
the user is in TABLE 18, and is positioned on row number 5 and column
number 1.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
108
STRT_COL
TABLE 18
BETA
1
5 / 1
0.200
MODEL 2500 2500
SECTION 6 6 SECTION