Calculations; Reports - DANIEL 2500 User's Reference Manual

______________________________________________________ MODEL ______________________________________________________
SELECTION
ENTRIES

CALCULATIONS

The CALCULATIONS sub-menu, which is the fifth sub-menu on the MAIN
MENU, has the names of individual calculation sheets as lower level sub-menus.
Individual calculation sheets provide programming instructions for data processing
by the MODEL 2500. Representative calculation sheets include those that:
- Perform initialization routines
- Process status inputs
- Process operator entries
- Process timer functions
- Perform flow rate, volume, and mass calculations
- Process report scheduling

REPORTS

The REPORTS sub-menu, which is the sixth sub-menu on the MAIN MENU, has
lower level sub-menus composed of each report produced by a MODEL 2500
configuration.
A complete report can be printed by pressing the ENTER key when the report
name is displayed on the front panel.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
48
The SELECTION ENTRIES lower level sub-menu
displays the name, units, and startup selection of
selection list operator entries, and allows for
changing the startup selections. For example, in a
MODEL 2500 configured to measure orifice mass
and volume, selection list operator entries are
typically the type and location of orifice taps.
Startup selections for tap type are pipe and flange.
Startup selections for tap location are upstream and
downstream.
MODEL 2500 2500
SECTION 4 4 SECTION