Define Curve Tables (Ctabdef, Catbend) - Siemens Sinumerik 840D sl Programming Manual

Axis couplings
9.2 Curve tables (CTAB)
9.2.1

Define curve tables (CTABDEF, CATBEND)

Function
A curve table represents a part program or a section of a part program enclosed by CTABDEF
at the start and CTABEND at the end.
Within this part program section, unique following axis positions are assigned to individual
positions of the leading axis using motion operations; these following axis positions are used
as intermediate points when calculating the curve definition in the form of a polynomial up to
the 5th order.
Condition
The MD must be configured accordingly to ensure that sufficient memory space is reserved
for the definition of curve tables ( → machine manufacturer).
Syntax
CTABDEF(<following axis>,<leading axis>,<n>,<periodicity>[,<memory
location>])
...
CTABEND
512
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Job planning