Siemens Sinumerik 840D sl Programming Manual page 862

Tables
17.1 Operations
Operation Meaning
3) Punching with delay ON
PDELAYON
PHU Physical unit of a variable
PL 1. B spline: Node clearance
2. Polynomial interpolation: Length of
the parameter interval for polynomial
interpolation
PM Per minute
PO Polynomial coefficient for polynomial
interpolation
POCKET3 Technological cycle:
milling rectangular pocket
POCKET4 Technological cycle:
milling circular pocket
POLF LIFTFAST retraction position
POLFA Start retraction position of single axes
with $AA_ESR_TRIGGER
POLFMASK Enable axes for retraction without a
connection between the axes
POLFMLIN Enable axes for retraction with a linear
connection between the axes
POLY Polynomial interpolation
POLYPATH Polynomial interpolation can be
selected for the AXIS or VECT axis
groups
PON Punching ON
PONS Punching ON in interpolation cycle
POS Position axis
862
1) 2)
W Description see
PGAsl
m
Punching and nibbling on or off (SPOF, SON, PON,
SONS, PONS, PDELAYON, PDELAYOF, PUNCHACC)
[Page 665]
PGAsl
Definition of user variables (DEF) [Page 25]
PGAsl
s
1. Spline interpolation (ASPLINE, BSPLINE, CSPLINE,
BAUTO, BNAT, BTAN, EAUTO, ENAT, ETAN, PW, SD,
PL) [Page 246]
2. Polynomial interpolation (POLY, POLYPATH, PO,
PL) [Page 262]
PGsl
PGAsl
s
Polynomial interpolation (POLY, POLYPATH, PO, PL)
[Page 262]
PGAsl
Milling a rectangular pocket - POCKET3 [Page 765]
PGAsl
Milling a circular pocket - POCKET4 [Page 768]
PGsl/PGAsl
m
PGsl
m
PGsl
m
m PGsl
PGAsl
m
Polynomial interpolation (POLY, POLYPATH, PO, PL)
[Page 262]
PGAsl
m
Polynomial interpolation (POLY, POLYPATH, PO, PL)
[Page 262]
PGAsl
m
Punching and nibbling on or off (SPOF, SON, PON,
SONS, PONS, PDELAYON, PDELAYOF, PUNCHACC)
[Page 665]
PGAsl
m
Punching and nibbling on or off (SPOF, SON, PON,
SONS, PONS, PDELAYON, PDELAYOF, PUNCHACC)
[Page 665]
PGsl
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Job planning