Siemens Sinumerik 840D sl Programming Manual page 861

Operation Meaning
OSP1 Oscillating: Left reversal point
OSP2 Oscillation right reversal point
OSS Tool orientation smoothing at end of
block
OSSE Tool orientation smoothing at start and
end of block
OST Smoothing of tool orientation by
specifying angular tolerance in degrees
with SD (maximum deviation from
programmed orientation characteristic)
OST1 Oscillating: Stopping point in left
reversal point
OST2 Oscillating: Stopping point in right
reversal point
OTOL Orientation tolerance for compressor
functions, orientation smoothing and
smoothing types
OVR Speed offset
OVRA Axial speed offset
OVRRAP Rapid traverse override
P Number of subprogram cycles
PAROT Align workpiece coordinate system on
workpiece
PAROTOF Deactivate frame rotation in relation to
workpiece
PCALL Call subprograms with absolute path
and parameter transfer
PDELAYOF Punching with delay OFF
Job planning
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
1) 2)
W Description see
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) [Page 651]
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) [Page 651]
PGAsl
m
Tool orientation (ORIC, ORID, OSOF, OSC, OSS,
OSSE, ORIS, OSD, OST) [Page 435]
PGAsl
m
Tool orientation (ORIC, ORID, OSOF, OSC, OSS,
OSSE, ORIS, OSD, OST) [Page 435]
PGAsl
m
Tool orientation (ORIC, ORID, OSOF, OSC, OSS,
OSSE, ORIS, OSD, OST) [Page 435]
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) [Page 651]
PGAsl
m
Asynchronous oscillation (OS, OSP1, OSP2, OST1,
OST2, OSCTRL, OSNSC, OSE, OSB) [Page 651]
PGAsl
Programmable contour/orientation tolerance (CTOL,
OTOL, ATOL) [Page 500]
PGAsl
m
PGAsl
m
PGAsl
m
PGAsl
Number of program repetitions (P) [Page 197]
PGsl
m
PGsl
m
PGAsl
Calling subroutine with path specification and
parameters (PCALL) [Page 205]
PGAsl
m
Punching and nibbling on or off (SPOF, SON, PON,
SONS, PONS, PDELAYON, PDELAYOF, PUNCHACC)
[Page 665]
Tables
17.1 Operations
861