Siemens Sinumerik 840D sl Programming Manual page 845

Operation Meaning
3) Feedrate normal to DIN 66025
FNORM
FOCOF Deactivate travel with limited torque/
force
FOCON Activate travel with limited torque/force
FOR Counter loop with fixed number of
passes
FP Fixed point: Number of fixed point to be
approached
FPO Feedrate characteristic programmed via
a polynomial
FPR Rotary axis identifier
FPRAOF Deactivate revolutional feedrate
FPRAON Activate revolutional feedrate
FRAME Data type for the definition of coordinate
systems
FRC Feedrate for radius and chamfer
FRCM Feedrate for radius and chamfer, modal
FROM The action is executed if the condition is
fulfilled once and as long as the
synchronized action is active
FTOC Change fine tool offset
Online fine tool offset OFF
3)
FTOCOF
FTOCON Online fine tool offset ON
FXS Travel to fixed stop ON
FXST Torque limit for travel to fixed stop
Job planning
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
1) 2)
W Description see
PGAsl
m
Feedrate response (FNORM, FLIN, FCUB, FPO)
[Page 470]
PGAsl
m
Travel to fixed stop (FXS, FXST, FXSW, FOCON,
FOCOF) [Page 630]
PGAsl
m
Travel to fixed stop (FXS, FXST, FXSW, FOCON,
FOCOF) [Page 630]
PGAsl
Count loop (FOR ... TO ..., ENDFOR) [Page 110]
PGsl
s
PGAsl
Feedrate response (FNORM, FLIN, FCUB, FPO)
[Page 470]
PGsl
PGsl
PGsl
PGAsl
Defining new frames (DEF FRAME) [Page 303]
PGsl
s
PGsl
m
PGAsl
Cyclically checking the condition (WHEN,
WHENEVER, FROM, EVERY) [Page 563]
PGAsl
Online tool offset (FTOC) [Page 600]
PGAsl
m
Online tool offset (PUTFTOCF, FCTDEF, PUTFTOC,
FTOCON, FTOCOF) [Page 416]
PGAsl
m
Online tool offset (PUTFTOCF, FCTDEF, PUTFTOC,
FTOCON, FTOCOF) [Page 416]
PGsl
m
PGsl
m
Tables
17.1 Operations
845