Siemens Sinumerik 840D sl Programming Manual page 472

Path traversing behavior
8.2 Feedrate response (FNORM, FLIN, FCUB, FPO)
FNORM
The feed address F defines the path feed as a constant value according to DIN 66025.
Please refer to Programming Manual "Fundamentals" for more detailed information on this
subject.
FLIN
The feed characteristic is approached linearly from the current feed value to the programmed
F value until the end of the block.
Example:
N30 F1400 FLIN X50
472
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Job planning