!
Important:
If you check the Ethernet interface mapping with the ifconfig command at the
Important:
server's CLI, the ports will be different from those listed above. See
interface mapping
6. If you need to change the mappings, click on Continue.
The Configure Ethernet Interfaces page displays.
7. Make any changes and click Change.
The status of the configuration update appears in the window.
8. When the update completes, the following message appears: Successfully
configured ethernet interfaces.
Ethernet interface mapping
The Ethernet interface mapping is different for various Communication Manager releases:
Release 3.1 Ethernet configurations
l
Release 3.0 Ethernet configurations
l
Release 2.2 Ethernet configurations
l
on page 155 for a complete explanation.
Ethernet interface mapping
Ethernet
03-300529 Issue 4 January 2008
155