Check Ethernet Interface Settings - Avaya S8500 Series Job Aids For Field Replacements
Hide thumbs
Also See for S8500 Series:
- Manual (330 pages) ,
- Installing and configuring (118 pages) ,
- User manual (72 pages)
Table of Contents
Advertisement
Job Aid: Replacing the Avaya S8500 dual network interface
Check Ethernet interface settings
Before replacing the dual network interface, write down the Ethernet interface settings:
1. Go to Server Configuration > Configure Server Web page.
2. Click Continue through the review notices until you get to the Configure Server page with
"Specify how you want to use this wizard" at the top.
3. Select Configure Individual Services and click Continue.
The wizard displays a new left-side navigation panel.
4. Select Set Identities.
The Set Server Identities page displays.
5. Write down the Ethernet interface settings. You will use them again at
NIC
on page 154.
140 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
Configuring the
Advertisement
Table of Contents
