Avaya S8500 Series Job Aids For Field Replacements page 122

Job Aid: Replacing the SAMP on the Avaya S8500 Series server
S8500B front panel connections
Figure 32: S8500B server, front view
the front panel of the S8500B server.
Figure 32: S8500B server, front view
h2ms85bf KLC 091704
Figure notes:
1. CD-ROM drive activity LED
2. CD eject button
3. CD-ROM drive activity LED
4. CD-ROM eject button
5. System error LED
6. System locator LED (blue); use to
visually locate the server if it is in a
location with other servers.
7. Hard disk drive activity LED
122 Job Aids for Field Replacements (FRUs) for the Avaya S8500 Server
on page 122 shows the connections that are available on
1 2
10. Reset button: press to reset the server and
11. USB connections for the Compact Flash
3 4
11
8. Power on LED
Lit (not flashing): the server is on.
l
Flashing: the server is turned off and still
l
connected to an AC power source.
Off: AC power is not present, or the power
l
supply or the LED itself has failed.
9. Power control button
run the power-on self-test (POST). You
might have to use a pen or the end of a
straightened paper clip to press the button.
5 6 7
8
9
10