Avaya S8500 Series Job Aids For Field Replacements page 127

All ports are located on the rear of the server. See
Table 4: Network Interface Card Ethernet designations
Web Designation
Eth 0 (LAN 1)
Eth 1 (LAN 2)
Eth 2 (LAN 3)
Eth 3 (LAN 4)
See (Figure 37: S8500 B network interface card connections
locations on the NIC.
Figure 37: S8500 B network interface card connections
Figure notes:
1. LAN 3 - to customer LAN
For more information see
S8500B modem connections
There is one modem on an Avaya S8500B server configuration that connects to the USB port
on the SAMP (see
Required options on the SAMP modem are set by Avaya defaults on the SAMP.
Use
CNA
Services laptop
Customer LAN
Not used
2. LAN 4 - not used
Ethernet interface mapping
Figure 38: Modem connections on the Avaya S8500B server
Replacing the SAMP on the Avaya S8500B server
Table 4.
Mother Board Dual NIC
Eth 1
Eth 2
Eth 1
Eth 2
on page 127) for the Ethernet port
1 2
2
h2ms85b1 KLC 100504
on page 155.
03-300529 Issue 4 January 2008
on page 128).
127