Installing The New Network Interface Card In The S8500C Server - Avaya S8500 Series Job Aids For Field Replacements

Installing the new network interface card in the S8500C server

Note:
Wear an antistatic wrist ground strap whenever handling the server or its
Note:
components. Connect the strap to an approved ground, such as an unpainted
metal surface. See the job aid titled Approved Grounds for more information.
To install the replacement dual NIC in the S8500C server:
1. Carefully grasp the new NIC by the top edge or upper corners and align it with the PCI-2
expansion slot on the motherboard. (The SAMP is connected on the other side of this
connector.) Press the NIC firmly into the expansion slot. See
network interface card in the S8500C server
Figure 43: Inserting the network interface card in the S8500C server
1
2
S lo
t 1
1
S lo
t 2
2
Installing the new network interface card
Figure 43: Inserting the
on page 147.
3
03-300529 Issue 4 January 2008
h3msn85c LAO 032306
147