Part Number Guide - Johnson Controls FMS-1655 Series Installation Manual

BRAND
LB = Johnson Controls
UNIT
FMS = Flow Monitor Station (FMS)
SERIES
1655 = BACnet / N2 Controller
1655L = LonWorks Controller
1655M = BACnet Monitor
STYLE
S = Surface mount
F = Flush mount
(BACnet / N2 controllers only)
T = Thin mount
INTERNAL SENSOR
0 = No internal sensor
1 = Standard internal sensor
(Flush mount controller only)
REMOTE SENSOR
0 = No remote sensors
1 = One remote sensor
2 = Two remote sensors
3 = Three remote sensors
(Not available with LonWorks Controllers)
4 = Four remote sensors
(Not available with LonWorks Controllers)
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
Please Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee the interference will not occur in a particular installation. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Caution: To comply with the limits for an FCC Class A computing device, always use the isolated power supply module and recommended interface
cables with this unit.
The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the part responsible for compliance could
void the user's authority to operate the equipment.
This Class-A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe-A est conforme à la norme NMB-003 du Canada.
Due to continuous improvement, TRIATEK reserves the right to change product specifications without notice.
-
- 2 -
-
GENERAL
Specifications