Legend - Pepperl+Fuchs IC-KP-R2-V1 Manual

IC-KP-R2-V1
Commands
7.4

Legend

<OldPW>
<Battery condition 1> : 1 byte, first digit of battery status (percentage, decimal, ASCII
<Battery condition 2> : 1 byte, second digit of battery status (percentage, decimal, ASCII
<Battery condition 3> : 1 byte, third digit of battery status (percentage, decimal, ASCII
<baud>
<ByteNum>
<CHCK>
<ConfAddr>
<CR>
<Data>
<ETX>
<F>
<Fill Sign>
<FixLen>
<FixType>
<IDCode>
<Ident channel>
<LkName>
<LF>
<Mode>
<Model type>
<Month>
<NewPW>
<P>
<Part no.>
<PW>
<Sensor channel>
<Status>
<SW no.>
<SW date>
<TagType>
42
: 4 bytes HEX, old password
encoded).
encoded).
encoded).
: Baud rate: 2400, 4800, 9600, 19200, 38400 (bit/s)
: 2 ASCII bytes, length of <IDCode>;
System MV: 4 characters (04h)
System IQ: 8 characters (08h)
: 1 byte HEX, 8-bit check sum with the addition of all preceding
characters, without overrun.
: 1 ASCII character, word starting address in configuration
area of data carrier. The following applies for IPC03:
'1' = Protection Word
'2' = Control Word
: 1 ASCII character, 13d, carriage return
: <WordNum> times 4 bytes. When communicating a word,
the highest value byte is transferred first and the lowest
value byte last.
: 1 ASCII character, 03d, end of text
: 1 bit, multiplex mode, 0 (0b): Mode off, 1 (1b): Mode on
: 1 ASCII character
: 2 ASCII characters from '0' to 'F', length of the read only code in bytes,
: 2 ASCII characters, for example: '02' for IPC02
: 4 bytes, 6 bytes or 8 bytes (depending on the tag type)
: 1 ASCII character, (channel '1', '2', '3', '4', 'x')
'x' = all connected channels
: n ASCII characters (depending on the type designation)
: 1 ASCII characters, 10d, line feed
: 1 ASCII character,
'0' Configuration store off
'1': Configuration store on
: Product order code: IC-KP-R2-V1
: 2 ASCII bytes, hexadecimal encoding, 01 ... 0C (01=January,
0C=December)
: 4 bytes HEX, new password
: 1 bit, password mode, 0 (0b): Mode off, 1 (1b): Mode on
: Article number, 6 ASCII characters '0' to '9'
: 4 bytes HEX, password
: 1 ASCII character in trigger mode ('3', '4')
: 1 ASCII character (see chapter 7.5)
: Application software number
: Application software version date
: 2 ASCII characters, for example: '02' for IPC02