Pepperl+Fuchs IC-KP-R2-V1 Manual page 32

Identcontrol interface with serial interface
Table of Contents

Advertisement

IC-KP-R2-V1
Commands
Enhanced buffered write words (EW):
Command:
Response:
The read/write head repeatedly attempts to write <WordNum> 32-bit words from the address
<WordAddr> until successful. After each successful write, the head sends the response and
then switches to continuous read. The read/write head then reads the same tag until the tag
has left the detection range or a new tag appears within the detection range. At this point, the
read/write head again starts write attempts.
The status '05h' is only output when a tag leaves the detection range or is not yet within the
detection range.
If two tags enter the read range one immediately after the other, the status '05h' is not issued
between the two readings.
32
EW <Ident channel><WordAddr><WordNum><Data> <CHCK><ETX>
<Status><Ident channel><CHCK><ETX>

Advertisement

Table of Contents
loading

Table of Contents