Pepperl+Fuchs IC-KP-R2-V1 Manual page 4

IC-KP-R2-V1
5.4 Device connection..............................................................................15
5.4.1 Power supply.................................................................................... 15
5.4.2 Read/Write Head and Trigger Sensors ............................................. 15
5.4.3 Cable length between control interface and R/W heads ................... 16
5.4.4 Ground connection........................................................................... 16
5.4.5 Instructions for connecting the command interface .......................... 16
6 Commissioning......................................................................... 18
6.1 Commissioning...................................................................................18
6.1.1 Connection.......................................................................................18
6.1.2 Device settings .................................................................................18
6.1.3 Output of the contents of read data carriers on the display ............... 19
6.1.4 Operating with the communication interface.....................................20
7 Commands ................................................................................ 22
7.1 General information on the serial interface......................................22
7.1.1 Command examples ........................................................................ 22
7.2 Command types .................................................................................24
7.3 Command overview............................................................................24
7.3.1 System commands........................................................................... 26
7.3.2 Standard read/write commands........................................................31
7.3.3 Special command modes................................................................. 33
7.4 Legend.................................................................................................42
7.5 Fault/status messages .......................................................................43
8 Technical Specifications .......................................................... 44
8.1 Dimensions .........................................................................................44
8.2 General data ........................................................................................44
9 Troubleshooting........................................................................ 46
9.1 Fault location ......................................................................................46
10 ASCII table................................................................................. 47
4