Pepperl+Fuchs IC-KP-R2-V1 Manual page 25

IC-KP-R2-V1
Commands
Special command modes
Password mode with IPC03
Command description
See "Set password mode (PM):" on page 34
See "Change password (PC):" on page 34
See "Set password (PS):" on page 35
Configuration IPC03
Command description
See "Single get configuration (SG):" on page 35
See "Enhanced buffered get configuration (EG):" on page 35
See "Single write configuration (SC):" on page 36
See "Enhanced buffered write configuration (EC):" on page 36
Extended commands for tag type IPC11 and IDC-..-1K
Command description
See "Single write read only code (SX):" on page 37
See "Enhanced buffered write read only code (EX):" on page 37
See "Set tag ID code (TI):" on page 38
See "Fill data carrier (S#):" on page 38
Extended commands for tag type IDC-...-1K
Command description
See "Single read special read only code (SS):" on page 39
See "Enhanced read special read only code (ES):" on page 39
See "Single program special read only code (SP):" on page 39
See "Enhanced program special read only code (EP):" on page 39
See "Initialize data carrier (SI):" on page 40
Extended commands for type IQC-... read/write tags.
Command description
See "Single write words with lock (SL)" on page 40
See "Enhanced write words with lock (EL)" on page 40
Extended commands for IQH2-... read/write heads
Command description
See "Read Parameters" on page 40
See "Write Parameters" on page 41
Note!
In the following descriptions, the commands are highlighted in bold. Text that appears in < ... >
is explanatory text for the command sequence.
Abbreviation
PM
PC
PS
Abbreviation
SG
EG
SC
EC
Abbreviation
SX
EX
TI
S#
Abbreviation
SS
ES
SP
EP
SI
Abbreviation
SL
EL
Abbreviation
RP
WP
25