Graco Reactor 2 Series Operation page 24

Component Identification
ADM Display Details
Power Up Screen
The following screen appears when the ADM is
powered up. It remains on while the ADM runs
through initialization and establishes communication
with other modules in the system.
Menu Bar
The menu bar appears at the top of each screen.
(The following image is only an example.)
Date and Time
The date and time are always displayed in one of
the following formats. The time is always displayed
as a 24-hour clock.
• DD/MM/YY HH:MM
• YY/MM/DD HH:MM
• MM/DD/YY HH:MM
Arrows
The left and right arrows indicate screen navigation.
Screen Menu
The screen menu indicates the currently active
screen, which is highlighted. It also indicates the
associated screens that are available by scrolling left
and right.
24
System Mode
The current system mode is displayed at the lower
left of the menu bar.
Alarm/Deviation
The current system error is displayed in the middle of
the menu bar. There are four possibilities:
Icon Function
No Icon
No information or no error has occurred
Advisory
Deviation
Alarm
Status
The current system status is displayed at the lower
right of the menu bar.
Navigating the Screens
There are two sets of screens:
• The Run screens control spraying operations and
display system status and data.
• The Setup screens control system parameters and
advanced features.
Press on any Run screen to enter the Setup
screens. If the system has a password lock, the
Password screen displays. If the system is not locked
(password is set to 0000), System Screen 1 displays.
Press on any Setup screen to return to the
Home screen.
Press the Enter soft key
function on any screen.
Press the Exit soft key
Use the other softkeys to select the function adjacent
to them.
to activate the editing
to exit any screen.
332636C