Graco Reactor 2 Series Operation page 68

Shutdown
8. Close the main air shutoff valve.
9. Turn main power switch OFF. Allow engine
cooling dwell time prior to shutting down the
engine.
To prevent electric shock do not remove any
shrouds or open the electrical enclosure door.
240 V is still present in the system until the
engine has stopped.
NOTICE
Allow engine cooling dwell time, per
manufacturer recommendations, prior to
shutdown. Dwell time will help engine
properly cool down after running at operating
temperature for any period of time. Stopping
the engine immediately after running it at
full load for an extended period of time can
cause the engine to overheat due to the lack of
coolant flow. See engine manual.
68
10. Press to stop the engine.
11. Close all fluid supply valves.
12. Engage gun piston safety lock then close fluid
inlet valves A and B.
Fusion Probler
332636C