Hydraulic Lock Of The Front Three-Point Hitch; Working And Transport Position Of The Front Three-Point Hitch; Driving With Agricultural Machines Attached To The Front Three-Point Hitch - Zetor PROXIMA GP Series Operator's Manual

Hydraulic lock of the front three-point hitch

Hydraulic locking of the front three-point hitch is performed
in any position of the hydraulic cylinders with the ball valve
in the front part of the tractor (2).
A Free position
Valve levers are in the horizontal position
- The hitch can be controlled from the cabin
B Locked position
Valve levers are in the vertical position
- The hitch is locked

Working and transport position of the front three-point hitch

A Working position of the front
three-point hitch
B Transport position of the front
three-point hitch
Changing the position of the draw-bars of the front three-
point hitch:
1. Release and remove the pin (1) from the opening.
2. Lift the arm from position (A) to position (B).
3. Lock the arm by inserting the pin (2) in the opening (2)
and secure the pin.
Only insert the pin in the openings, never check
whether the opening is free with your fingers!
The maximum permissible speed of the tractor
with agricultural machines attached to the front three-
-1
point hitch is 15 km.h
attached to the front three-point hitch, we recommend
you to lift the lower lifting draw-bars to the transport
position.
. If no implement or weight is
HITCHES
-point hitch
PGPPN091
PGPPN092
PGPPN093
149