Table of Contents
Advertisement
2.1 USING THE FRONT PANEL DISPLAY
2 GETTING STARTED
Let us review how we got to this last message.
1. First, we started at the setpoints page header S1 745 SETUP.
2. We then moved to the second sub-header message under page S1, which is PREFERENCES, and we
pressed the
key.
EN TE R
3. We then moved to the last message in this group.
2
A path can be used as a means of specifying where a message is located in the 745 relay. For this last mes-
sage, the path would be S1 745 SETUP / PREFERENCES / DEFAULT MESSAGE INTENSITY. For the purposes of this
manual, we will refer to messages in this manner. Press the
key to return to the preferences sub-header
E S CA P E
message. Pressing the
key from any of the messages under a sub-header will return the display to that
E S CA P E
sub-header message. From a sub-header message, the repeated pressing of
moves the display
M E SS AG E
through the list of sub-header messages to the page header. As an alternative, you could press the
key
S ETPO INT
and move directly to the next page.
2-2
745 Transformer Management Relay
GE Power Management
Advertisement
Table of Contents
