Loading Setpoints From A File - GE 745 TRANSFORMER MANAGEMENT RELAY Instruction Manual

9 745 PC SOFTWARE
Loading the 745 with setpoints from a file is accomplished as follows:
1. Select the File > Open menu item.
2. 745PC launches the Open dialog box listing all filenames in the 745 default directory with the extension
745. Select the setpoint file to download and click OK to continue.
3. Select the File > Send Info to Relay menu item. 745PC will prompt to confirm or cancel the setpoint file
load. Click Yes to download the setpoints to the 745 relay or No to cancel.
The following example illustrates the entering of setpoints from the 745PC program.
1. Select the Setpoint > System Setup menu item
2. Click the Transformer button in the System Setup window.
3. The following dialog box prompts for the transformer setpoint information. Note that the number of selec-
tions shown is dependent on the 745 installed options.
Figure 9–12: TRANSFORMER SETPOINTS DIALOG BOX
GE Power Management
Figure 9–11: OPEN SETPOINTS FILE DIALOG BOX
745 Transformer Management Relay
9.3 USING 745PC

9.3.3 LOADING SETPOINTS FROM A FILE

9.3.4 ENTERING SETPOINTS
9
9-9