Punch Unit Type 1075 (B531) - Ricoh MP 7503SP Field Service Manual

Stapling Paper Weight
Staple Position
Staple Capacity
Staple Supply
Stapled Stack Size
Trim Waste Staple Capacity
Waste Staple Hopper Full
Detection
Power Consumption
Power Source
Size (W x D x H)
Weight

Punch Unit Type 1075 (B531)

This punch unit is installed in the Finisher SR4080.
Punch Hole Positions
Punch Paper Size
2-Hole (NA)
2
64 to 80 g/m (17 to 20 lb)
4 Modes
• 1 Staple: Front, Rear, Rear-Oblique
• 2 Stapes: 2 locations
5000 staples/cartridge
Cartridge or Staple Replacement
Sheets Sets
10 to 100 200 to 30
2 to 9 150
10 to 50 150 to 30
2 to 9 150
30,000 or more
Provided
Less than 100 W
DC 24 V (From Mainframe)
800 x 730 x 980 mm (31.5" x 28.7" x 38.6")
Less than 65 kg (143 lb.)
2/3-hole (North America)
2/4-hole (Europe)
A5 to A3 SEF, 11" x 17" to 5.5" x 8.5" SEF
A5 to A4 LEF, 8.5" x 11" LEF, 5.5" x 8.5" LEF
Optional Equipment Specifications
Sizes
A4 SEF, B5 SEF, 8.5" x 11" SEF
A4 LEF, B5 LEF, 8.5" x 11" LEF
A3, B4, 11" x 17", 8.5" x 14"
53