7. Troubleshooting
3. Peel the tape from the tray holder [A].
4. Attach the tray holder to the back of the finisher [B].
5. Store the auxiliary trays in the holder if they are not needed.
Finishers SR4120/SR4130 (D3CG/D3CH)
Using Auxiliary Trays
The trailing edges of excessively curled or Z-folded paper can activate the tray full sensors before the
tray is actually full. Once this occurs and the "Exit Tray Full" message appears, the job stops and cannot
continue until some sheets are removed from the tray which is only partially full. The auxiliary trays,
number [1], [2], and [3] on their undersides are designed to prevent this problem.
1510