Ricoh MP 7503SP Field Service Manual page 1497

Tray SP7504 12
Tray 3
Tray 4
1. Clean the shafts and replace the necessary gears.
2. Replace a gear if its cutout and arrow are not in the same position.
3. When you replace Gear [A] or Gear [B], be sure to put the metal face on the outer side, and the
arrow must be in view.
4. If a replacement gear is not available, do this as a temporary procedure:
• Remove the paper feed unit.
• Remove the gear.
• Clean the gear shaft and inside the gear.
• Attach the gear.
• Install the paper feed unit.
SP7504 8 SP7504 9
Gear [A]
Jam Detection
SP7504 10 SP7504 11
Gear [B]
Gear [A] Gear [B]
1495