Installer Options; Making Changes To Installer Setup - Honeywell Home THX9321 Prestige 2.0 Manual

Installer Options

The following options are available when you access
Installer Options. For more information on each, press Help
on the thermostat or see Table 3.
Fig. 56. Installer Options screen.
®
THX9321 PRESTIGE 2.0 AND THX9421 PRESTIGE
Table 3. Installer Options.
Menu Item
Create Setup Press CREATE SETUP to set all system
settings one by one.
View/Edit Press VIEW/EDIT CURRENT SETUP to
Current Setup select a specific function and make quick
changes
Set Up Press SET UP DIAGNOSTICS to set up
Diagnostics and test Delta T diagnostics.
Installer Test Press INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly.
Minimum off timers are ignored during
the test
Data Logs Press DATA LOGS to view the Alerts Log,
User Interactions Log, and Performance
Logs.
Wireless Device Press WIRELESS DEVICE MANAGER to
Manager add, remove, rename, or view the
connected wireless accessories.
Advanced Press ADVANCED OPTIONS to setup the
Options thermostat using a USB device or to
restore the thermostat to the factory
default settings.
NOTE: If the THX9321 has been setup
WITHOUT an Equipment Interface
Module or the TrueZONE Wireless
Adapter and you would like to add one,
you must reset the thermostat back to
factory defaults.
NOTE: You can use the thermostat USB port to download
all Installer Setup settings, including your com-
pany name and contact information. You can
upload this data to each thermostat you install, to
save time.

Making Changes to Installer Setup

Follow these steps to set system options after initial
installation.
NOTE: Use a USB device to save set up time. See "USB
Port" beginning on page 119 for more informa-
tion.
1. Touch Menu.
2. Select Installer Options.
Installer Op ons
21
®
IAQ WITH EIM
Description
Fig. 57.
68-0311—08