Honeywell Home THX9321 Prestige 2.0 Manual page 52

®
THX9321 PRESTIGE 2.0 AND THX9421 PRESTIGE
ISU Installer Setup
Number Name
Off
7110 Air Filter 1
Replacement
Reminder
Run Time:
10, 20, 30, 45, 60, 90, 120, 150
Note: "1" is not
days
displayed if there is
only 1 filter.
Calendar:
30, 45, 60, 75 days
3, 4, 5, 6, 9, 12, 15 months
Off
7110 Air Filter 2
Replacement
Reminder
Run Time:
10, 20, 30, 45, 60, 90, 120, 150
days
Calendar:
30, 45, 60, 75 days
3, 4, 5, 6, 9, 12, 15 months
Off
7120 Electronic Air
Cleaner Cell
Cleaning Reminder
Calendar Months:
6, 7, 8, 9, 10, 11, 12 months
Off
7120 Electronic Air
Cleaner Pre-Filter
Cleaning Reminder
Calendar Months:
3, 4, 5, 6 months
Off
7120 Electronic Air
Cleaner Post-Filter
Replacement
Calendar Months:
Reminder
6, 7, 8, 9, 10, 11, 12 months
None
8000 Humidifier Type
Steam
Bypass or Fan Powered
Thermostat (Internal)
8010 Which Sensor will be
used for Sensor Name (Remote)
Humidification
Sensor Name (Remote)
Control?
Sensor Name (Remote)
Sensor Name (Remote)
Sensor Name (Remote)
Sensor Name (Remote)
(Up to 6 Remote Sensors)
None
8030 What Terminals are
Wired to the U1
Humidifier?
U2
U3
68-0311—08
®
IAQ WITH EIM
Table 4. Installer Setup (ISU) Table. (Continued)
Settings Default
Off
Off
Off
Off
Off
None
Thermostat
(Internal)
Thermostat
defaults to the
next unused U
terminal (U1,
U2, U3).
52
Residential,
Commercial Requires
or Both EIM
Both No
Both No
Both No
Both No
Both No
Both No
Both No Select a sensor to control humidification
(thermostat or an optional remote sensor). If
multiple sensors are installed, you can use a
different sensor for dehumidification control.
See "Humidification Control" beginning on
page 130.
Note: Humidity sensing cannot be averaged.
Both No Number of Outputs:
THX9321 Thermostat: U1 and U2 terminals
Equipment Interface Module (EIM): U1, U2 and
U3 terminals
U1, U2, U3 are dry contacts that require power.
See "Wiring IAQ Equipment or a Heat/Cool
Stage to the U Terminals" beginning on
page 148.
Notes