Locating The Connect Buttons On Redlink Accessories - Honeywell Home THX9321 Prestige 2.0 Manual

®
THX9321 PRESTIGE 2.0 AND THX9421 PRESTIGE
6. Press and quickly release the CONNECT button on
each new RedLINK accessory.
NOTE: For locations of CONNECT buttons on
RedLINK accessories, see "Locating the
Connect Buttons on RedLINK Accessories"
beginning on page 18.
Fig. 41. Thermostat in listening mode.
7. After a short delay (up to 20 seconds), check thermo-
stat to confirm the connection of each RedLINK
accessory.
8. Touch Done at the thermostat after all new RedLINK
accessories are connected.
Fig. 42. Thermostat in listening mode.
NOTE: Thermostat displays a count-down timer while in
the listening mode. If it detects no activity for 15
minutes, it exits listening mode.
68-0311—08
®
IAQ WITH EIM
Locating the Connect Buttons on
RedLINK Accessories
Wireless Outdoor Sensor
1. Press and quickly release the CONNECT button on
the Wireless Outdoor Sensor. After a short delay (up
to 15 seconds), the thermostat will display "Wireless
Outdoor Sensor added."
Fig. 43. Wireless outdoor sensor connect button.
Portable Comfort Control
1. Press CONNECT on the Portable Comfort Control
display screen.
Fig. 44. Portable Comfort Control connect button.
2. Press DONE on the Portable Comfort Control when it
displays "Connected."
3. Press "No" at the next screen to save and exit, or press
Done
"Yes" if you need to connect additional thermostats to
the Portable Comfort Control. See Fig. 45.
NOTE: The Portable Comfort Control can control up to 16
thermostats.
Fig. 45. Connect additional thermostats to Portable
4. Follow the same linking procedure as above to con-
nect additional thermostats.
18
CONNECT
WIRELESS SETUP
MCR32942
YES NO
CONNECT MORE?
M28482
Comfort Control.