Honeywell Home THX9321 Prestige 2.0 Manual page 90

®
THX9321 PRESTIGE 2.0 AND THX9421 PRESTIGE
Fig. 168.
Fig. 169.
Fig. 170.
Fig. 171.
68-0311—08
®
IAQ WITH EIM
The Alerts Log can include:
• The alert name and description.
• System details at the time of the alert (Delta T,
thermostat settings, heat/cool stages on, status of IAQ
equipment, etc.)
• The alert message that is displayed to the user.
• The alert status (snoozed, dismissed, recovered)
User Interactions Log
The User Interactions Log can help a service technician
save time by determining if the issue is related to a system
problem or an accidental user error.
The User Interactions Log records the date and time for
most changes made by the user, whether made at the
thermostat or from a remote location (RedLINK Internet
Gateway, Portable Comfort Control, etc.). The log saves the
most recent 250 user changes, including:
• Indoor Air Quality Settings
• Maintenance Reminders
• Temperature Settings
• System/Fan Mode
• Alerts (snoozed or dismissed)
• Installer Setup
• Date/Time
Performance Logs
NOTE: Only applies to THX9421 Thermostat with an
Equipment Interface Module.
The Performance Log allows the service technician to
quickly check system performance over time to determine
if the equipment is operating as expected or if it requires
servicing.
The thermostat contains the following logs:
• Cooling Performance Log
• Heating Performance Log
• Emergency Heat Performance Log
• Run Time by Equipment Type
• Indoor and Outdoor Conditions Log
90
Fig. 172.