Displaying The Content Of A Specific Acl - HP ProCurve 6120G/XG Manual

IPv4 Access Control Lists (ACLs)
Displaying ACL Data
Note
This information also appears in the show running display. If you executed write
memory after configuring an ACL, it appears in the show config display.
For example, if you assigned a standard ACL with an ACL-ID of "1" to filter
inbound traffic on port 10, you could quickly verify this assignment as follows:
Figure 9-21. Example of Listing the ACL Assignment for an Interface

Displaying the Content of a Specific ACL

This command displays a specific ACL configured in the running config file in
an easy-to-read format.
Note
This information also appears in the show running display. If you executed write
memory after configuring an ACL, it appears in the show config display.
Syntax: show access-list < acl-name-string >
9-58
Display detailed information on the content of a specific ACL
configured in the running-config file.
Indicates that a standard ACL with
the ID of "2" is assigned to filter
inbound traffic on port 7.
Indicates that a standard ACL with
an ID of "1" is assigned to filter
inbound traffic on port 3, and that
another standard ACL with an ID of
"2" is assigned to filter inbound
traffic on port 7).