Displaying Acl Configuration Data - HP 2530 Manual Supplement

ipv6 access-list "XYZ"
exit
Entering either an unnumbered remark followed by a manually numbered ACE (using <1 -
2147483647>), or the reverse (an unnumbered ACE followed by a manually numbered
remark) can create an "orphan" remark.
Configuring two remarks without including either sequence numbers or an intervening
unnumbered ACE causes the second remark to overwrite the first.
Example 39 Overwriting one remark with another
HP Switch(config-ipv6-acl)# permit ipv6 host fe80::a1:121 fe80::/104
HP Switch(config-ipv6-acl)# deny tcp any eq ftp 2001:db8:0:a1::/64
HP Switch(config-ipv6-acl)# remark Marketing
HP Switch(config-ipv6-acl)# remark Channel_Mktg
Port_1_5400(config-ipv6-acl)# show access-list Accounting config
ipv6 access-list "Accounting"
10 permit ipv6 fe80::a1:121/128 fe80::/104
20 deny tcp ::/0 eq 21 2001:db8:0:a1::/64
30 remark "Channel_Mktg"
exit
NOTE:
at the end of an ACL, each successive remark replaces the previous one until an
ACE is configured for automatic inclusion at the end of the list.

Displaying ACL configuration data

ACL Commands
show access-list
show access-list config
show access-list vlan <vid>
show access-list ports
<port-list>>
show access-list vlan
<acl-name-string>
show access-list resources
show access-list radius
<port-list>
94 Updates for the HP Switch Software IPv6 Configuration Guide
100 remark "Permits HTTP"
100 permit tcp 2001:db8::2:1/120 eq 80 ::/0
110 remark "Denies HTTP from subnet 1."
120 remark "Denies pop3 from 1:157."
120 deny tcp 2001:db8::1:157/128 eq 110 ::/0 log
130 permit ipv6 ::/0 ::/0
Where multiple remarks are sequentially entered for automatic inclusion
<all |
<all |
Function
View a brief listing of all ACLs on the switch.
Display the ACL lists configured in the
switch.
List the name and type for each IPv4 and
IPv6 ACL application assigned to a
particular VLAN on the switch.
List the name and type of ACLs assigned to
all ports on the switch or to a particular port
or static trunk configured on the switch.
Display detailed content information for a
specific ACL.
Display the currently available per-slot
resource availability.
List the IPv4 and IPv6 RADIUS ACLs currently
assigned for either all ports and trunks, or
for the specified ports or trunks.
Page
95
95
97
98
"Displaying static port (and trunk)
ACL assignments" (page 98)
See appendix "Monitoring
Resources" in the current HP
Switch Software Management
and Configuration Guide for your
switch.
For more on
this topic, see
chapter