Antenna Overview - Cisco 4G-ANTM-OM-CM Manual

Cisco Cellular and GPS 3-in-1 Vehicle
Mount and Fixed Infrastructure Antenna
(ANT-3-4G2G1-O)
This chapter describes the technical specifications and installation instructions for the Cisco Cellular 3-in-1 Vehicle Mount and
Fixed Infrastructure Antenna, hereafter referred to as the antenna. The antenna is a three port antenna with two elements
designed to cover the 698-960, 1448-1511 and 1710-2700 MHz cellular bands and one GPS element. The antenna can be
mounted on the roof of a vehicle or fixed structure. The antenna meets or exceeds a variety of environmental ruggedization
specifications for transportation applications.
CAUTION: Read the information in
The topics included are:


Antenna Overview


Technical Specifications

Installing the Antenna

Obtaining Documentation and Submitting a Service Request
Antenna Overview

Antenna Features

Antenna Model

Antenna Assembly
Antenna Features
The antenna features:

Three antenna elements within one radome: two cellular and one GPS

Outdoor and transportation ready

Roof mount installation

Dual cellular elements supporting 698-960, 1448-1511 and 1710-2700 MHz
— Omnidirectional, vertically polarized, MIMO
— Integrated 2 foot cables with TNC male connectors
— LTE elements are interchangeable, either one can be connected to Main or Aux

Active GPS antenna has integrated 17 foot cable with SMA male connector
Safety Precautions before installing or replacing antennas.
Cisco Systems, Inc. www.cisco.com
292