Table of Contents
Advertisement
Cisco Aironet Omnidirectional Antennas AIR-ANT2450V-N, AIR-ANT2450VG-N, AIR-ANT2450V-N-HZ, and
AIR-ANT2450HG-N
System Requirements
This antenna is designed for use with the Cisco Aironet outdoor access points.
Safety Precautions
WARNING:
Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can come
into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits, as
they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local
codes (e.g. U.S.: NFPA 70, National Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 280
For your safety, read and follow these safety precautions.
1.
Before you install an antenna, contact your Cisco account representative to explain which mounting method to use for the
size and type of antenna that you are about to install.
2.
Find someone to help you—installing an antenna is often a two-person job.
3.
Select your installation site with safety, as well as performance, in mind. Remember that electric power lines and phone
lines look alike. For your safety, assume that any overhead line can kill you.
4.
Contact your electric power company. Tell them your plans and ask them to come look at your proposed installation.
5.
Plan your installation carefully and completely before you begin. Each person involved in an installation should be assigned
to a specific task and should know what to do and when to do it. One person should be in charge of the operation to issue
instructions and watch for signs of trouble.
6.
When installing your antenna, follow these guidelines:
a.
Do not use a metal ladder.
b.
Do not work on a wet or windy day.
c.
Do dress properly—wear shoes with rubber soles and heels, rubber gloves, and a long-sleeved shirt or jacket.
133
Hide quick links:
Advertisement
Table of Contents
