Aironet six-element dual-band mimo patch array antenna (16 pages)
Summary of Contents for Cisco ANT-4G-PNL-OUT-N
Page 1
Cisco Multiband Panel Outdoor 4G MIMO Antenna (ANT-4G-PNL-OUT-N) This chapter describes the technical specifications and installation instructions for the Cisco Multiband Panel Outdoor 4G MIMO antenna, hereafter referred to as the antenna. The antenna is a dual-port antenna designed to cover cellular 4G bands. The supported bands are: LTE700/Cellular/PCS/AWS/MDS •...
Page 2
• Antenna Model Table 6-1 Cisco Multiband Panel Outdoor 4G MIMO antenna Antenna Model Description ANT-4G-PNL-OUT-N Cisco Multiband Panel Outdoor 4G MIMO antenna Antenna Assembly Figure 6-1 Cisco ANT-4G-PNL-OUT-N Antenna Cisco CGR 1000 and 2000 Series Connected Grid Antennas Guide...
2700 MHz Antenna Radiation Pattern—Vertical Plane, page 6-17 • 2700 MHz Antenna Radiation Pattern—Horizontal Plane Figure 6-14 2700 MHz Antenna Radiation Pattern—Horizontal Plane Line Color Description — Blue ( Port 1 — Red ( Port 2 Cisco CGR 1000 and 2000 Series Connected Grid Antennas Guide 6-16...
Page 17
Table 6-3 Environmental Specifications for the Cisco ANT-4G-PNL-OUT-N Antenna Specification Description Operating temperature range -40 to 158°F (-40 to 70°C) Storage temperature range -40 to 185°F (-40 to +85°C) Cisco CGR 1000 and 2000 Series Connected Grid Antennas Guide 6-17...
Page 18
Preparing the Antenna for Installation, page 6-21 • Mounting the Antenna, page 6-21 • Connecting the Lightning Arrestor, page 6-22 • Connecting the Antenna to the Router, page 6-22 • Cisco CGR 1000 and 2000 Series Connected Grid Antennas Guide 6-18...
Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071. SAVE THESE INSTRUCTIONS. Cisco CGR 1000 and 2000 Series Connected Grid Antennas Guide 6-19...
Your Cisco sales representative can explain which mounting method to use for the size and type antenna you are about to install. Before you install an antenna, contact your Cisco account representative to explain which mounting • method to use for the size and type of antenna that you are about to install.
If the antenna is to be wall mounted, use the screws provided. Use both clamps and screws for extra security if required. Mounting the Antenna Follow these instructions to mount the antenna: Cisco CGR 1000 and 2000 Series Connected Grid Antennas Guide 6-21...
Cisco currently supports RSS Version 2.0. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.