Antenna Installation - Cisco 4G-ANTM-OM-CM Manual

Cisco Multiband Panel Outdoor 3G Antenna (ANT-3G-PNL-OUT-N)
— Do not work on a wet or windy day.
— Do dress properly—wear shoes with rubber soles and heels, rubber gloves, and a long-sleeved shirt or jacket.

If the assembly starts to drop, move away from it and let it fall. Because the antenna, mast, cable, and metal guy wires are
all excellent conductors of electrical current, even the slightest touch of any of these parts to a power line completes an
electrical path through the antenna and the installer.

If any part of the antenna system should come in contact with a power line, do not touch it or try to remove it yourself. Call
your local power company to have it removed safely.

If an accident should occur with the power lines, call for qualified emergency help immediately.

Antenna Installation

The antenna installation includes the following procedures:

Tools and Equipment Required

Installing the Antenna
Tools and Equipment Required
In addition to the parts included in the antenna kit described in the section
following tool to install the antenna on the router:

A flathead screwdriver

3/4 in. open-end wrench

LMR-400 with male end-to-end RF cable (weatherized)

Coax seal
Note: This list does not include the tools and equipment required to assemble and erect the tower, mast, or other structure you
intend to mount your antenna on.
Installing the Antenna
Follow these instructions to install the antenna:
1. Choose the mounting polarization configuration that you prefer.
Contents of the Antenna
310
Kit, you must provide the