Installing The Antenna - Cisco 4G-ANTM-OM-CM Manual

Cisco WPAN Dipole Antenna (ANT-WPAN-OD-OUT-N)
The following are the Environmental and Mechanical Specifications for the Cisco ANT-WPAN-OD-OUT-N Antenna:
Specification
Operating temperature range
Mount style
Location
Connector
Dimensions
Weight
Wind rating
IP rating
Radome
Material substance compliance

Installing the Antenna

This section contains the following:

Contents of the Antenna Kit

Safety Warnings

Safety Instructions

Tools and Equipment Required

Mounting the Antenna
Contents of the Antenna Kit
The antenna kit contains:

1 x Cisco ANT-WPAN-OD-OUT-N Antenna
Safety Warnings
WARNING: Avoid using or servicing any equipment that has outdoor connections during an electrical storm.
There may be a risk of electric shock from lightning. Statement 1088
WARNING: Do not work on the system, or connect or disconnect cables, during periods of lightning activity. Statement 1001
WARNING: Do not locate the outdoor antenna near overhead power lines or other electric light or power circuits, or where it can
come into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits,
as they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local
codes (for example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada:Canadian Electrical Code, Section 54).
Statement 1052
468
Description
-40 to 185°F (-40 to 85°C)
Direct chassis or bulkhead mount
Outdoor
Type N male
7.70 in. length x 1.02 in. diameter
(19.56 cm length x 2.60 cm diameter)
0.26 lbs (120 g)
265 km/hr (165 mph)
IP67
Polyester/Fiberglass, UV resistant,
white
RoHS compliant