Cisco 4G-ANTM-OM-CM Manual page 533

Outdoor Panel Antenna for WiMAX 1.8, 2.5, and 3.8 GHz
2
3
4
1
3
5
6. Adjust to the desired azimuth and elevation angles. Tighten all nuts and bolts to a torque rating of 55 in-lbf.
7. Attach the lightning arrestor to the router.
8. Attach the two RF cables to the antenna by connecting the ends of the LMR-400 (male) cables to the two receptacles on
the rear of the antenna panel.
1
1/4"-20x3/4 carriage bolt
1/4"-20 flat washer
Elevation adjustable bracket
5
6
2 1/4"-20 spring lock washer
4 Elevation adjustable bracket
6 1/4"-20 hex nut
533