Table of Contents
Advertisement
Cisco Cellular 2-in-1 Vehicle Mount and Fixed Infrastructure Antenna (ANT-2-4G2-O)
Power Specifications
Table 3
Power Specifications for the Cisco ANT-2-4G2-O Antenna
Specification
Nominal Impedance
Maximum input power per port
Installing the Antenna
The antenna installation includes the following procedures:
Contents of the Antenna Kit
Safety Warnings
Safety Precautions
Tools and Equipment Required
Mounting the Antenna
Connecting the Antenna to the Router
Contents of the Antenna Kit
The antenna kit contains:
1 x Cisco ANT-2-4G2-O antenna
Safety Warnings
WARNING:
Avoid using or servicing any equipment that has outdoor connections during an electrical storm.
There may be a risk of electric shock from lightning. Statement 1088
WARNING:
Do not work on the system, or connect or disconnect cables, during periods of lightning activity. Statement 1001
WARNING:
Do not locate the outdoor antenna near overhead power lines or other electric light or power circuits, or where it can
come into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits,
as they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local
codes (for example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada:Canadian Electrical Code, Section 54).
Statement 1052
WARNING:
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of
a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain
that suitable grounding is available. Statement 1024
WARNING:
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
WARNING:
To report a gas leak, do not use a telephone in the vicinity of the leak. Statement 1039
WARNING:
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any
equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing
accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety
warnings that accompanied this device. Statement 1071. SAVE THESE INSTRUCTIONS.
Description
50 ohms
5 watts
272
Hide quick links:
Advertisement
Table of Contents
