Download Print this page

Cisco 4G-LTE-ANTM-O-3 Installation Manual

Dual lte-single gps multi-band antenna.
Hide thumbs

Advertisement

Cisco Dual LTE-Single GPS Multi-band Antenna
Installation Guide
This document provides the description, supported features, and installation instructions of the Cisco
Dual LTE-Single GPS Multi-band (4G-LTE-ANTM-O-3) Antennas.
Caution
Read the information in
This document contains the following sections:

Overview of the 4G-LTE-ANTM-O-3 Antenna

Deciding which antenna to use involves multiple factors, such as coverage area, maximum distance,
indoor location, outdoor location, and antenna height.
When an antenna is used indoors, the building construction, ceiling height, and internal obstructions
must be considered. In outdoor environments, obstructions such as trees, vehicles, buildings, and hills
must be considered. Distance is the primary factor when using outdoor-wireless communications.
However, coverage area also becomes important when you use wireless client devices to communicate
with a wireless device.
Cisco Systems, Inc.
www.cisco.com
Safety Precautions
Antenna Ports, page 19
before installing or replacing antennas.

Advertisement

   Related Manuals for Cisco 4G-LTE-ANTM-O-3

   Summary of Contents for Cisco 4G-LTE-ANTM-O-3

  • Page 1: Table Of Contents

    Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide This document provides the description, supported features, and installation instructions of the Cisco Dual LTE-Single GPS Multi-band (4G-LTE-ANTM-O-3) Antennas. Caution Read the information in Safety Precautions before installing or replacing antennas. This document contains the following sections: Overview of the 4G-LTE-ANTM-O-3 Antenna, page 1 •...

  • Page 2: Parts List

    Overview of the 4G-LTE-ANTM-O-3 Antenna 4G-LTE-ANTM-O-3 antenna is an integrated 3-in-1- indoor and outdoor antenna. It comes with two Long Term Evolution (LTE) antennas and one Global Positioning System (GPS) antenna in a single radome. Figure 1 shows the 4G-LTE-ANTM-O-3 antenna.

  • Page 3: Technical Specifications

    2. Free space Voltage Standing Wave Ratio (VSWR) over all operating frequency ranges when mounted on a 1-foot diameter ground plane with unused ports loaded. 3. When mounted per installation instructions. Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 4

    4G-LTE-ANTM-O-3 Antenna. Figure 2 Parts of 4G-LTE-ANTM-O-3 Antenna GPS and 2 LTE antennas inside Mounting stud Radome available in 4 colors: White, Black, Cables Red or Blue (Indoor or Outdoor) Gasket Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 5

    Overview of the 4G-LTE-ANTM-O-3 Antenna Figure 3 shows the antenna with cable labels. Figure 3 The Antenna with Cable Labels MPN LABEL LTE-ID LABEL 2EA GPS ID LABEL Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 6

    Overview of the 4G-LTE-ANTM-O-3 Antenna Figure 4 shows the Low Band 698-960 MHz EL (PHI=0). Figure 4 Low band 698-960 MHz EL (PHI=0) Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 7

    Overview of the 4G-LTE-ANTM-O-3 Antenna Figure 5 shows the Low Band 698-960MHz EL (PHI=90). Figure 5 Low band 698-960MHz EL (PHI=90) Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 8

    Overview of the 4G-LTE-ANTM-O-3 Antenna Figure 6 shows the Low Band 698-960MHz AZ (THETA=90). Figure 6 Low Band 698-960MHz AZ (THETA=90) Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 9

    Overview of the 4G-LTE-ANTM-O-3 Antenna Figure 7 shows High Band 1710-2700MHz EL (PHI=0). Figure 7 High Band 1710-2700MHz EL (PHI=0) Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 10

    Overview of the 4G-LTE-ANTM-O-3 Antenna Figure 8 shows High Band 1710-2700MHz EL (PHI=90). Figure 8 High Band 1710-2700MHz EL (PHI=90) Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 11

    Overview of the 4G-LTE-ANTM-O-3 Antenna Figure 9 shows High Band 1710-2700MHz AZ (THETA=90). Figure 9 High Band 1710-2700MHz AZ (THETA=90) Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 12: Supported Antennas

    11.0 dB @ 2.6 GHz 4G-CAB-ULL-20 20 ft (6 m) 0.90 dB @ 700 MHz 1.8 dB @ 2.6 GHz 4G-CAB-ULL-50 50 ft (15 m) 2.2 dB @ 700 MHz 4.3 dB @ 2.6 GHz Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 13: Antenna Options By Deployment Type

    This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 14

    • Before you install an antenna, contact your Cisco account representative to explain which mounting method to use for the size and type of antenna that you are about to install.

  • Page 15: Installation Instructions

    Installation Instructions Installation Instructions The following section contains steps for installing the 4G-LTE-ANTM-O-3 antenna: Step 1 While choosing the location, keep the following in mind: • Attempt to center the antenna on a flat plane. • Attempt to position the antenna so that it has 8 inches of flat plane in any given direction.

  • Page 16

    Tighten it further using a wrench until the antenna is fully seated. Visually inspect the outer rubber antenna gasket to ensure that it has been compressed and sealed tightly against the mounting surface and radome. Figure 12 Tighten the Nut after the Antenna is fully seated Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide OL-32387-01...

  • Page 17: Deployment Scenarios

    Deployment Scenarios Deployment Scenarios Figure 13 shows the deployment of the 4G-LTE-ANTM-O-3 antenna on an ATM with a single router. All the three antenna cables are SubMiniature version A (SMA-male) connectors, but the MAIN and the Note Diversity (DIV) of the router has the Threaded Neill–Concelman (TNC-female) connectors, and the GPS has an SMA-female connector.

  • Page 18

    Deployment Scenarios Figure 14 shows the deployment of 4G-LTE-ANTM-O-3 on an ATM with dual routers. Figure 14 Deployment of an Antenna with Dual Routers MODEM MAIN Router A RF Splitter Power Adapter MODEM MAIN Router B RF Splitter Power AC or DC...

  • Page 19: Antenna Ports

    Antenna Ports This section describes the antenna ports, their locations on the router, and the recommended antenna-installation locations. You can connect an antenna to the ports of a Cisco Enhanced High-Speed WAN Interface Card (EHWIC) or Cisco 819 series router.

  • Page 20: Related Documentation

    Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.

Comments to this Manuals

Symbols: 0
Latest comments: