Cisco Vandal Resistant Omni-directional Dome Antenna for 860-928 MHz ISM, WPAN and LoRaWAN (ANT-UN-MP-OUT-QMA)
Figure 2
Dimensions
NOTE: Antenna Dimensions are shown in millimeters, except where explicitly specified in inches denoted by " or [ ].
Antenna Installation
The antenna installation includes the following procedures:
Tools and Equipment Required
Mounting Components
Tools and Equipment Required
In addition to the parts included in the antenna kit, you must provide the following tools to install the antenna on the router:
1-5/16" (1.3125"), or 33.34mm open-end wrench. Recommended torque is 50-65 ft-lb or 68-88 Nm.
McMaster Carr Double-D Hole Punch P/N 3449A85 or equivalent. Alternatively, you can drill or use a circular hole punch to
create a 0.91" diameter hole.
454