Installing The Antenna; Tools And Equipment Required; Mounting On A Pole - Cisco Aironet AIR-ANT2588P3M-N Installation Manuallines

Cisco Aironet 2.4-GHz/5-GHz 8-dBi Directional Antenna (AIR-ANT2588P3M-N)

Installing the Antenna

Installing the Antenna
You can install the antenna on a pole from 1.63" to 2.3" pipe O.D. The mounting options allow the antenna to be vertically
or horizontally polarized.

Tools and Equipment Required


Antenna mount bracket

Elevation adjustable bracket

Azimuth adjustable bracket

Two 1/4 in. 20 azimuth and elevation adjustment bolts and nuts with 1/4 in. flat washers and lock washers

Two pipe clamps
The following tools and equipment are not provided:

5/16 in wrench

1/4 in flat head screwdriver

5/16 in nut driver or flat head screwdriver for pipe clamps

Mounting on a Pole

To mount your antenna on a pole:
1. Remove antenna and mount kit from packaging.
2. Attach antenna mount bracket to the back of the antenna as shown applying a maximum nut-tightening torque of 12
in lbf (1.1 Nm).
6