Download
Share
Print this page
Cisco AIR-ANT2544V4M-R Specification And User Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Antenna
  5. AIR-ANT2544V4M-R
  6. Specification and user manual

Cisco AIR-ANT2544V4M-R Specification And User Manual

Aironet dual-band mimo wall-mounted omnidirectional antenna
Hide thumbs Also See for AIR-ANT2544V4M-R:

Advertisement

Quick Links

See also: Manual
Cisco Aironet Dual-Band MIMO Wall-Mounted
Omnidirectional Antenna (AIR-ANT2544V4M-R)
This document outlines the specifications for the Cisco Aironet 2.4-GHz/5-GHz Dual-Band MIMO
Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) and provides instructions for
mounting it. The antenna operates in the 2.4- and 5-GHz frequency ranges and is designed for indoor or
outdoor use.
The following information is provided in this document.
•
•
•
•
•
•
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2012 Cisco Systems, Inc. All rights reserved.

Advertisement

loading

Related Manuals for Cisco AIR-ANT2544V4M-R

Summary of Contents for Cisco AIR-ANT2544V4M-R

  • Page 1: Table Of Contents

    Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) This document outlines the specifications for the Cisco Aironet 2.4-GHz/5-GHz Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) and provides instructions for mounting it. The antenna operates in the 2.4- and 5-GHz frequency ranges and is designed for indoor or outdoor use.

  • Page 2: Technical Specifications

    6.3 in (16 cm) Weight Antenna: 1.48 lb. (671.5 g); Cable 3-ft. (91.4 cm) plenum Connector RP-TNC Environment Indoor/outdoor Temperature range -22° F to 158° F (-30° C to 70° C) Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...
  • Page 3 2.4-GHz Antenna 1 Azimuth and Elevation Plane Patterns 5-GHz Antenna 1 Azimuth and Elevation Plane Patterns 2.4-GHz Antenna 2 Azimuth and Elevation Plane Patterns 5-GHz Antenna 2 Azimuth and Elevation Plane Patterns Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...

  • Page 4: System Requirements

    2.4-GHz Antenna 4 Azimuth and Elevation Plane Patterns 5-GHz Antenna 4 Azimuth and Elevation Plane Patterns System Requirements This antenna is designed for indoor and outdoor use with any Cisco Aironet radio device with dual-band (2.4- and 5-GHz) RP-TNC connectors.

  • Page 5: Safety Precautions

    National Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 280 For your safety, read and follow these safety precautions. Before you install an antenna, contact your Cisco account representative to explain which mounting method to use for the size and type of antenna that you are about to install.

  • Page 6: Installation Notes

    Generally, the higher an antenna is above the floor, the better it performs. If possible, find a mounting place directly above your wireless device to ensure the lead-in cable can be as short as possible. Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...

  • Page 7: Installing The Antenna

    Jam nut You may need the following tools and equipment, which are not provided. • A #2 Phillips screwdriver A drill and drill bit • A pencil • Two hose clamps • Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...
  • Page 8 Mounting on a Vertical Surface Follow these steps to mount your antenna on a vertical surface. Attach the antenna bracket to the antenna using the jam nut provided (Figure Step 1 Figure 1 Antenna Bracket Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...
  • Page 9 Figure 2 Antenna Bracket Attached to Mounting Bracket Determine the mounting location for the antenna. Step 3 Attach the wall bracket to the wall using the two screws provided (Figure Step 4 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...
  • Page 10 To adjust the azimuth and elevation, loosen the bolt that attaches the antenna bracket to the mounting Step 6 bracket (Figure 5). Azimuth can be adjusted ±90 degrees. Elevation can be adjusted +15 degrees and -35 degrees. Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...
  • Page 11 Insert the antenna shaft through the hole in the ceiling. Step 3 Thread the jam nut onto the antenna shaft and tighten. Step 4 Figure 6 shows the ceiling mount process. Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...
  • Page 12 Step 2 Tighten the hose clamps until the antenna is secure on the mast. Step 3 Once the antenna is secured on the mast, you can adjust the azimuth and elevation. Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...

  • Page 13: Suggested Cable

    Cisco currently supports RSS Version 2.0 Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
  • Page 14 Obtaining Documentation and Submitting a Service Request Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01...