Safeguard Engine Settings - D-Link DGS-3600 Series User Manual

Safeguard Engine Settings

To enable Safeguard Engine or configure advanced Safeguard Engine settings for the Switch, click Security > Safeguard Engine
> Safeguard Engine Settings, which will open the following window.
To enable the Safeguard Engine option, select Enabled with the drop-down State menu and click the Apply button.
To configure the advanced settings for Safeguard Engine, click the CPU Utilization Settings button to view the following
window.
To configure, set the following parameters and click Apply.
Parameter Description
State Use the pull-down menu to globally enable or disable Safeguard Engine settings for the Switch.
Rising Used to configure the acceptable level of CPU utilization before the Safeguard Engine mechanism
Threshold is enabled. Once the CPU utilization reaches this percentage level, the Switch will move into
(20%-100%) Safeguard Engine state, based on the parameters provided in this window.
Falling Used to configure the acceptable level of CPU utilization as a percentage, where the Switch leaves
Threshold the Safeguard Engine state and returns to normal mode.
(20%-100%)
Trap / Log Use the pull-down menu to enable or disable the sending of messages to the device's SNMP agent
and switch log once the Safeguard Engine has been activated by a high CPU utilization rate.
Mode Used to select the type of Safeguard Engine to be activated by the Switch when the CPU utilization
reaches a high rate. The user may select:
Fuzzy – If selected, this function will instruct the Switch to minimize the IP and ARP traffic flow
to the CPU by dynamically allotting an even bandwidth to all traffic flows.
Strict – If selected, this function will stop accepting all ARP packets not intended for the Switch,
and will stop receiving all unnecessary broadcast IP packets, until the storm has subsided.
The default setting is Fuzzy mode.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 11- 43. Safeguard Engine Settings window
Figure 11- 44. Safeguard Engine Settings window
300