Dalsa Piranha ES-80-08k40-00-R User Manual page 83

Piranha ES-xx User Manual
Syntax
get lpc
get rfs
get roi
get rus
get sag
get sao
get sbh
get sbr
get sbv
get scd
get sdo
get sem
get sfc
get sgr
get slt
get smm
get sot
Teledyne DALSA
Parameters Description
Returns the current coefficient set num ber.
Returns w hether factory settings have been saved . The
cam era alw ays returns 1 (factory settings have been
saved ).
Returns the current region of interest.
Returns w hether user settings have been saved .
0 = N o user settings saved
1 = User settings have been saved
t Returns the analog gain in d B for the tap ind icated
t = Tap value. 0 for all taps or 1-number of CCD taps
for ind ivid ual tap selection.
t
Returns the analog offset for the tap ind icated .
t = 0 for all taps or 1 to number of CCD taps for
ind ivid ual tap selection.
Returns the horizontal binning value.
Returns the speed of cam era serial com m unication port.
Returns the vertical binning value.
Returns the CCD shift d irection w here:
0 = Forw ard TDI shift d irection.
1 = Reverse TDI shift d irection.
2 = Externally controlled d irection control via Cam era
Link control CC3.
t
Returns the d igital offset value in DN for the tap
ind icated .
t = Tap value. 0 for all taps or 1-number of CCD taps
for ind ivid ual tap selection.
Returns the current exposure m od e:
3 = External SYN C, m axim um exposure tim e
7 = Internal program m able SYN C, m axim um exposure
tim e. Factory setting.
x
Returns the FPN coefficient for the pixel num ber
ind icated .
x =pixel num ber w ithin the range 1 to sensor pixel
count.
Returns the current analog gain reference value in d B.
Returns the current low er threshold value.
Returns the cam era's m irror m od e:
0: Pixels read out left to right (1 to 4096 or 8192)
1: Pixels read out right to left (8092 or 4096 to 1)
Returns the Cam era Link strobe rate.
83
03-032-20070-02