Dalsa Piranha ES-80-08k40-00-R User Manual page 100

100
Mnemonic
upd ate gain reference
verify tem perature
verify voltage
w rite FPN coefficients
w rite PRN U coeffs
w rite user settings
03-032-20070-02
Syntax Parameters
ugr
vt
vv
wfc
i
wpc
i
wus
Piranha ES-xx User Manual
Description
Changes 0d B gain to equal the current
analog gain value set w ith the sag
com m and .
Refer to section Analog Signal
Processing: Setting Analog Gain and
Offset for d etails.
Check the internal tem perature of the
cam era
Check the cam era's input voltages and
return OK or fail
Write all current FPN coefficients to
EEROM w here i is:
1 = FPN coefficient set one
2 = FPN coefficient set tw o
3 = FPN coefficient set one
4 = FPN coefficient set tw o
Refer to section 3.6.2 Saving and
Restoring PRN U and FPN Coefficients
for d etails.
Write all current PRN U coefficients to
EEROM w here i is:
1 = PRN U coefficient set one
2 = PRN U coefficient set tw o
3 = PRN U coefficient set one
4 = PRN U coefficient set tw o
Refer to section 3.6.2 Saving and
Restoring PRN U and FPN Coefficients
for d etails.
Write all of the user settings to EEROM.
Refer to section 3.6.1 Saving and
Restoring Factory and User Settings for
d etails.
Teledyne DALSA