Dalsa Piranha ES-80-08k40-00-R User Manual page 82

82
Returning Camera Settings with Get Commands
You can also retu rn ind ivid u al cam era settings by in serting a ―
com m and that you w ant to qu ery. If the com m and has a tap or pixel nu m ber param eter,
you m u st also insert the tap nu m ber or pixel nu m ber that you w ant to qu ery. Refer to
Table 20 below for a list of available com m and s. To view a help screen listing the
follow ing get com m and s, u se the com m and
Table 20: Get Commands
Syntax
get cao
get ccf
get ccp
get clm
get css
get els
get epc
get gcm
get gcs
get gcv
get gfc
get gl
get gla
get gsf
03-032-20070-02
Parameters Description
t
Returns the analog offset for the tap ind icated
t = tap selection, either 1 to number of CCD taps, or
0 for all taps
x1 x2
Returns the FPN pixel coefficients for the pixel range
ind icated .
x1 = Pixel start num ber
x2= Pixel end num ber
x1 x2
Returns the PRN U pixel coefficients for the pixel range
ind icated .
x1 = Pixel start num ber
x2= Pixel end num ber
Returns the current Cam era Link m od e.
Returns the num ber of line sam ples averaged for pixel
coefficient calculations or for output of
Returns w hether the end -of-line statistics are turned off or
on.
0: Off
1: On
Returns w hether pixel coefficients are enabled or
d isabled .
The first param eter returns the FPN coefficients setting
w here:
0 = FPN coefficients d isabled
1 = FPN coefficients enabled
The second param eter returns the PRN U coefficients
setting w here:
0 = PRN U coefficients d isabled
1 = PRN U coefficients enabled
Returns the cam era's m od el num ber
Returns the cam era's serial num ber
Returns the cam era's softw are version.
x Returns the FPN pixel coefficient for the pixel ind icated .
x1 x2 Returns pixel values for the pixel range specified .
x1 x2
Returns the average of the pixel range ind icated .
i
Returns the frequency of the Cam era Link control sig nal
ind icated , either 1, 2, 3, or 4.
Piranha ES-xx User Manual
get"
in front of the
gh
.
gla
com m and .
Teledyne DALSA