Subsequently Adding Dishes; Changing The Programme; Child Lock - Hanseatic WQP8-J7710E User Manual

Build under dishwasher
Table of Contents

Advertisement

Available languages

Available languages

Subsequently adding dishes

Even if the dishwasher has already started,
you can still add dishes. Only add dishes if
the current programme has only been run-
ning for a short time. Otherwise the dishes
added will not be washed properly.
CAUTION!
Risk of scalding!
A surge of hot steam can escape if the dish-
washer door is open.
Keep a suffi cient distance from the door.
Never hold your head or upper body di-
rectly over the open door.
Keep children and pets away from the
appliance when opening the door.
Make sure that children do not open the
door during operation.
1. Press button (9)
to interrupt the pro-
gramme.
2. Leave the door slightly ajar and wait until
both spraying arms (15) and (22) come to
a complete stop.
3. Slowly open the door completely and add
the dishes.
4. Close the door.
5. Press button (9)
.
The programme will continue to run.
An acoustic signal sounds every minute
during the interruption of the pro-
gramme.

Changing the programme

You can interrupt a running programme at
any time and start a new programme. It is
important to find out how long the current pro-
Programmes and additional options
gramme has been running. If the programme
has been running for a long time, check the
dishwasher detergent dispenser (19) and top
up with dishwasher detergent if necessary.
1. Press button (9)
The programme stops.
2. Press and hold (8) P. Programme se-
lection is possible again after approx. 3
seconds.
3. Press button (8) P for so long until the
LED lights up in front of the desired pro-
gramme.
4. Press button (9)
The newly selected programme starts.
(9)

Child lock

The child lock prevents the dishwasher from
being operated unintentionally.
(2)
Activating the child lock
• Press and hold both buttons (2)
at the same time until the LED behind the
lock symbol (11)
All buttons are now locked.
Deactivating the child lock
• Press and hold both buttons (2)
at the same time until the LED behind the
lock symbol (11)
All buttons are free to use again.
Page EN-17
(8)
.
.
(11)
and
lights up.
and
no longer lights up.
(9)

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents