Adding Rinse Aid; Adding Dishwasher Salt - Hanseatic WQP8-J7710E User Manual

Build under dishwasher
Table of Contents

Advertisement

Available languages

Available languages

3. Slide the dishwasher detergent dispens-
er's lid closed until the tab (33) clicks into
place again.

Adding rinse aid

NOTICE
Risk of damage!
Using an excessive amount of rinse aid can
lead to increased foaming and can com-
promise the rinsing results.
Wipe away rinse aid which has over-
fl owed immediately.
Take note of the markings for the max-
imum fi ll quantities ("max") in the rinse
aid dispenser.
Using unsuitable substances can cause
damage to the dishwasher.
Only put rinse aids which are suitable for
dishwashers into the rinse aid dispenser.
Rinse aid ensures stain-free dishes and
speeds up the drying process. The added
rinse aid is automatically dosed during oper-
ation.
Add rinse aid before first use and when the
display
(3) lights up.
(34)
1. The rinse aid dispenser (18) is in the in-
side of the door.
2. Add as much rinse aid until the window
3. The rinse aid is pre-set to dispensed dose
4. When the dishes are
5. Put back on and tighten the rinse aid dis-

Adding dishwasher salt

Risk of damage!
You may damage the dishwasher and its
stainless steel surface by using dishwasher
salt in an improper manner.
(18)
Cleaners
Turn the lid an eighth turn in a coun-
ter-clockwise direction and remove it.
(34) turns black.
Wipe away any rinse aid which has spilt
immediately so that you do not compro-
mise the rinsing results and to avoid in-
creased foaming.
'4'. We recommend that you accept this
setting for the time being.
– matt and stained after the first clean: In-
crease the dispensed dose. To do this,
turn the arrow in the rinse aid dispenser
(18) clockwise to the desired setting, e.g.
'5'.
– sticky and have streaks: Decrease the
dispensed dose. To do this, turn the ar-
row in the rinse aid dispenser (18) coun-
ter-clockwise to the desired setting, e.g.
'3'.
penser's lid (18).
NOTICE
Only use regenerating salt which is spe-
cifi cally intended for dishwashers.
Always wipe away split dishwasher salt
immediately with a damp cloth.
Immediately after adding the dishwash-
er salt, start a programme, as overfl ow-
ing salt can damage the seals and fi lters
of the dishwasher.
Page EN-11

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents