Hanseatic WQP8-J7710E User Manual page 61

Build under dishwasher
Table of Contents

Advertisement

Available languages

Available languages

Problem
9
The dishes are not
completely clean.
10 The dishes are not
dried properly.
11 Error code E1
Error code E4
Error code E8
Possible cause
There are food scraps
which are encrusted
onto the dishes.
The dishes have not
been stacked optimally.
You have selected the
incorrect programme.
The dishwasher de-
tergent is incorrectly
dosed.
The water pressure is
too low.
The spraying arm can
not rotate unhindered.
The nozzles on the
spraying
arm
are
blocked/calcified.
Only one spraying arm
is activated. The LED
will only come on be-
hind one of the spraying
arm symbols
/
.
The dishes have not
been stacked optimally.
The rinse aid is incor-
rectly dosed.
The dishes were re-
moved too soon.
A programme with a
short run time was se-
lected.
The water intake is too
low.
Water is overflowing or
leaking out.
There is a valve failure. Contact our service department (see „Ser-
Troubleshooting table
Solution
Soak dirty dishes prior to washing the dish-
es.
Stack the dishes in such a way that all
parts can be reached by the water jets (see
„Loading the dishwasher" on page EN-13).
Select the correct programme using the
programme table (see „Programme table"
on page EN-19).
Dose the dishwasher detergent according
to the programme table (see „Programme
table" on page EN-19), the packaging infor-
mation and your degree of water hardness.
Turn the water tap on completely.
Ensure that no dishes are impeding the
motion of the spraying arm.
Clean the nozzles (see „Cleaning the wash
arms" on page EN-21).
Press button
/
for so long until both
LEDs light up.
Stack the dishes in another way (see
„Loading the dishwasher" on page EN-13).
Adjust the dispensed dose (see „Adding
rinse aid" on page EN-11).
Only empty the dishes after they have been
allowed to cool.
Use the programme table to select a pro-
gramme with a longer run time (see „Pro-
gramme table" on page EN-19).
Turn the tap on fully. Remove the kink in
the inlet hose. Increase the water pressure.
The dishwasher is not watertight.
C l o s e
t h e
Ta k e
u p
t h e
l e a k i n g
Contact our service department (see „Ser-
vice department" on page EN-30).
vice department" on page EN-30).
Page EN-29
v a l v e .
w a t e r.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents