Hanseatic WQP8-J7710E User Manual page 41

lower dish rack, as otherwise the upper
spraying arm will be blocked.
The seals of the door are sensitive to oil and
grease.
Do not apply grease to the door seals.
■
The door seals can be damaged by unsuit-
able cleaning agents.
Do not use harsh, aggressive, sol-
■
vent-based or abrasive cleaners.
The appliance is designed for a water pres-
sure of 0.4–10 bar (0.04–1.00 MPa, 40–100
2
N/cm ).
If the water pressure is high, install a
■
pressure reducer.
If in doubt, enquire about the water
pressure with the water supply compa-
ny.
Never connect the appliance to the
■
water tap or the mixing arm of a water
heater (continuous fl ow heater, pres-
sure-free boiler etc.).
Ensure that the inlet hose is not kinked
■
and is carefully connected.
Do not cut through the inlet hose. It con-
■
tains electrical components! If the inlet
hose is damaged, have it repaired by a
specialist.
■ Do not immerse the inlet hose in water.
■ Do not use old or previously installed in-
let or outlet hoses.
■ Make sure that there is at least a 40 mm
drainage cross-section so that the water
can always be pumped out freely.
■ Make sure that the outlet hose is not
damaged or kinked.
■ Do not attach the outlet hose yourself;
have it installed by a specialist plumber.
Page EN-9
Safety